Is It Harmful To Have A Piece Of Diapers?
Feb 05, 2019
1. Exterior wrapping Layer
Appearance wrapping layer can keep the child's body dry, quickly absorb urine and prevent side leakage. Nowadays, most of the best-selling diapers are non-woven cloth, the baby will not feel too much stimulation after wearing, soft affinity and comfort, it will be water vapor and hot and humid gas together, so that urinary rash away from the baby.
2. core Layer
The main absorption layer is the use of its capillary force, the baby's urine spread to the entire surface, play a rapid absorption, dispersion of urine and eventually storage of urine effect.
The diapers we usually see, most of which are layered, are made of high absorbent resins and pure wood pulp. The structure of the core body used for diapers is basically divided into three kinds:
One is the traditional core body (fluff pulp plus absorbent resin), its diversion effect is good, but easy fault; however, this traditional core technology is currently used by international big-name manufacturers of diapers.
The second is the composite core (dust-free paper plus non-woven fabric plus absorbent resin) is also called the whole core body, there is a thinner, continuous layer, can not play the characteristics of Tuo; There is also a between the first two, that is, thin type of composite core and then spread fluff pulp and absorbent resin, also known as semi-core body.
3. Bottom cloth
Influenced by price factors, the bottom of domestic best-selling diapers is mainly composed of polymer organic compounds of breathable polyethylene film composition, and some manufacturers began to use non-woven diapers, because of its higher comfort, softer.
A. The lump is hard.
Hard is mostly in order to one-sided pursuit of water absorption and increase polymer, reduce wood pulp, no wood pulp water absorption after the formation of the gap, polymer is easy to suck water after condensation into a group, and then form a hard gel, so that the baby will have uncomfortable feelings.
B. It's a soft piece.
The soft is the ratio of wood pulp and polymer relative balance suitable, generally will not affect infant and young child activities, if the impact of the urine is not wet has been changed, completely does not belong to the quality problem. Easy to start and faults are wood pulp and absorbent resin mixed in the case of a large amount of water absorption easy to trigger the results. Hard Tuo is to show that the content of absorbent resin is too high, the mixing situation is not good, this is the design and product problems. And the soft lump has no effect on the use at all, because it does not affect the baby's activity and use. The performance of "No lump, continuous layer" is closely related to the structure of the core material used in diapers.
